There’s been some discussion on the Readify mailing lists lately about all the different types of ASP.NET state mechanisms. There didn’t seem to be a good comparison resource online, so I thought it’d be my turn to write one.
The most commonly used and understood state bag is the good old Session object. Objects you stored here are persisted on the server, and available between requests made by the same user.
- Security isn’t too much of an issue, because the objects are never sent down to the client. You do need to think about session hijacking though.
- Depending on how ASP.NET is configured, the objects could get pushed back to a SQL database or an ASP.NET state server which means they’ll need to be serializable.
- If you’re using the default in-proc storage mode you need to think carefully about the amount of RAM potentially getting used up here.
- You might lose the session on every request if the user has cookies disabled, and you haven’t enabled cookie-less session support, however that’s incredibly rare in this day and age.
Usage is as simple as:
Session[“key”] = “yo!”;
Application state is also very commonly used and understood because it too is a hangover from the ASP days. It is very similar to session state, however it is a single state bag shared by all users across all requests for the life of the application.
- Security isn’t really an issue at all here because once again, the objects are never sent over the wire to the client. With application state, you also don’t have the risk of session hijacking.
- Everything in the bag is shared by everyone, so don’t put anything user specific here.
- Anything you put here will hang around in memory like a bad smell until the application is recycled, or you explicitly remove it so be conscious of what you’re jamming in to memory.
I can’t remember ever seeing a legitimate use of application state in ASP.NET. Generally using Cache is a better solution – as described below, it too is shared across all requests, but it does a very good job of managing its content lifecycle.
I’d love to know why the ASP.NET team included application state, other than to pacify ASP developers during their migration to the platform.
Usage is a simple as:
Application[“key”] = “yo!”;
HttpContext / Request State
Next up we have HttpContext.Current.Items. I haven’t come across a good name for this anywhere, so I generally call it “Request State”. I think that name clearly indicates its longevity – that is, only for the length of the request.
It is designed for passing data between HTTP modules and HTTP handlers. In most applications you wouldn’t use this state bag, but its useful to know that it exists. Also, because it doesn’t get persisted anywhere you don’t need to care about serialization at all.
Usage is as simple as:
Ah … the old view state option that sends chills down the spine of any semantic web developer who longs for the days when the web worked like the web instead of winforms hacked into HTML. (Don’t worry – ASP.NET MVC lets us return to those glory days!) But enough with my whining …
View state is used to store information in a page between requests. For example, I might pull some data into my page the first time it renders, but when a user triggers a postback I want to be able to reuse this same data.
While it makes life easier for us young drag-n-drop developers, it is a force to be reckoned with carefully.
- View state gets stored into the page, and if you save the wrong content into it you’ll rapidly be in for some big pages. I’ve seen ASP.NET pages with 10KB of HTML and 1.2MB of view state. Have a think about how long that page took to load!
- It’s generally used for controls to be able to remember things between requests, so that they can rebuild themselves after a postback. It’s not very often that I see developers using view state directly, but there are some legitimate reasons for doing so.
- Each control has its own isolated view state bag. Remember that pages and master pages each inherit from Control, so they have their own isolated bags too. View state is meant to support the internal plumbing of a control, and thus if you find that the bags being isolated is an issue for you then it’s a pretty good indicator that you’ve taken the wrong approach with your architecture.
- It can be controlled on a very granular level – right down to enabling or disabling it per control. There’s an EnableViewState property on every server control, every page (in the page directive at the top) every master page (also in the directive at the top), and an application wide setting in web.config. These are all on my default, but the more places you can disable it in your app, the better.
A full explanation of ViewState is beyond the scope of this article, but I highly recommend that every ASP.NET developer read TRULY Understanding ViewState by Dave Reed.
If you want a simpler discussion, be sure to take a look at my previous post – Writing Good ASP.NET Server Controls.
Usage is as simple as:
ViewState[“key”] = “yo!”;
Control state is somewhat similar to view state, except that you can’t turn it off.
The idea here is that some controls need to persist values across requests no matter what (for example, if it’s hard to get the same data a second time ’round).
I’m a bit hesitant about the idea of control state. It was only added in ASP.NET 2.0 and in many ways I wish they hadn’t. Sure, some controls will break completely if you do a postback without view state having being enabled. What if I never expect my page to postback though? Maybe I want to be able to turn it off still. Unfortunately I think this comes from the arrogance that is ASP.NET not trusting the browser to even wipe its own ass … even the most personal of operations must go via a server side event, so you’ll always do a postback – right? Wrong.
If you’re a control developer, please be very very conscious about your usage of control state.
Usage is a bit more complex … you need to override the LoadControlState and SaveControlState methods for your control. MSDN is a good place to find content for this – take a look at their Control State vs. View State Example.
Cache is cool. As a general rule, it’s what you should be using instead of Application.
Just like application, it’s shared between all requests and all users for the entire life of your application.
What’s cool about Cache is that it actually manages the lifecycle of its contents rather than just letting them linger around in memory for ever ‘n ever. It facilitates this in a number of ways:
- absolute expiry (“forget this entry 20 minutes from now”)
- sliding expiry (“forget this entry if it’s not used for more than 5 minutes”)
- dependencies (“forget this entry when file X changes”)
Even cooler yet, you can:
- Combine all of these great features to have rules like “forget this entry if it’s not used for more than 5 minutes, or if it gets to being more than 20 minutes after we loaded the data, or if the file we loaded it from changes”.
- Handle an event that tells you when something has been invalidated and thus is about to be removed from the cache. This event it is per cache item, so you subscribe to it when you create the item.
- Set priorities per item so that it can groom the lower priority items from memory first, as memory is needed.
- With .NET 2.0, you can point a dependency at SQL so when a particular table is updated the cache automatically gets invalidated. If you’re targeting SQL 2005 it maintains this very intelligently through the SQL Service Broker. For SQL 2000 it does some timestamp polling, which is still pretty efficient but not quite as reactive.
Even with all this functionality, it’s still pathetically simple to use.
Check out the overloads available on Cache.Items.Add();
I don’t really think of profile as state. It’s like calling your database “state” – it might technically be state, but who actually calls it that?! :p
The idea here is that you can store personalisation data against a user’s profile object in ASP.NET. The built in framework does a nice job of remembering profiles for anonymous users as well as authenticated users, as well as funky things like migrating an anonymous user’s state when they signup, etc.
By default you’d run the SQL script they give you create a few tables, then just point it at a SQL database and let the framework handle the magic.
I don’t like doing this because it stores all of the profile content in serialized binary objects making them totally opaque in SQL and non-queryable. I like the idea of being able to query out data like which theme users prefer most. There’s a legitimate business value in being able to do so, as trivial as it may sound. (If you think it sounds trivial, go read Super Crunchers – Why Thinking-by-Numbers Is The New Way To Be Smart by Ian Ayres.)
This problem is relatively easily resolved by making your own provider. You still get all the syntactic and IDE sugar that comes with ASP.NET Profiles, but you get to take control of the storage.
- They are uploaded to the server with every request, so don’t go sticking anything of substantial size in there. Even on my broadband connection, my uplink is 1/24th the speed of my downlink. Typically you will just store an id or a token in the cookie, and the actual content back on the server.
- Cookies can live for months or even years on a user’s machine (assuming they don’t explicitly clear them) meaning they’re a great way of persisting things like shopping carts between user visits.
I’m glad the ASP.NET team gave us access as raw as they did, but it also means that you need to have an understanding of how cookies work before you use them. As much as it might seem, you can’t just jump in and use them straight away.
For a rather in-depth look at exactly how cookies work, and how to use them in ASP.NET, look at my post: Using cookies in ASP.NET.
The query string is about as simple as you can get for state management. It lets you pass state from one page, to another, even between websites.
I’m sure you’re all familiar with query strings on the end of URLs like ShowProduct.aspx?productId=829.
Usage is as simple as:
string productId = Request.QueryString[“productId”];
I hope that’s been a useful comparison for you. If you think of any other ways of storing state in ASP.NET that you think I’ve missed, feel free to comment and I’ll add them to the comparison. 🙂
Update 15Apr08: Added cookies and query strings. Hidden form fields still to come.